| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
e1000: fix OOB in e1000_tbi_should_accept()
In e1000_tbi_should_accept() we read the last byte of the frame via
'data[length - 1]' to evaluate the TBI workaround. If the descriptor-
reported length is zero or larger than the actual RX buffer size, this
read goes out of bounds and can hit unrelated slab objects. The issue
is observed from the NAPI receive path (e1000_clean_rx_irq):
==================================================================
BUG: KASAN: slab-out-of-bounds in e1000_tbi_should_accept+0x610/0x790
Read of size 1 at addr ffff888014114e54 by task sshd/363
CPU: 0 PID: 363 Comm: sshd Not tainted 5.18.0-rc1 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x5a/0x74
print_address_description+0x7b/0x440
print_report+0x101/0x200
kasan_report+0xc1/0xf0
e1000_tbi_should_accept+0x610/0x790
e1000_clean_rx_irq+0xa8c/0x1110
e1000_clean+0xde2/0x3c10
__napi_poll+0x98/0x380
net_rx_action+0x491/0xa20
__do_softirq+0x2c9/0x61d
do_softirq+0xd1/0x120
</IRQ>
<TASK>
__local_bh_enable_ip+0xfe/0x130
ip_finish_output2+0x7d5/0xb00
__ip_queue_xmit+0xe24/0x1ab0
__tcp_transmit_skb+0x1bcb/0x3340
tcp_write_xmit+0x175d/0x6bd0
__tcp_push_pending_frames+0x7b/0x280
tcp_sendmsg_locked+0x2e4f/0x32d0
tcp_sendmsg+0x24/0x40
sock_write_iter+0x322/0x430
vfs_write+0x56c/0xa60
ksys_write+0xd1/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f511b476b10
Code: 73 01 c3 48 8b 0d 88 d3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 2b 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 8e 9b 01 00 48 89 04 24
RSP: 002b:00007ffc9211d4e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000004024 RCX: 00007f511b476b10
RDX: 0000000000004024 RSI: 0000559a9385962c RDI: 0000000000000003
RBP: 0000559a9383a400 R08: fffffffffffffff0 R09: 0000000000004f00
R10: 0000000000000070 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc9211d57f R14: 0000559a9347bde7 R15: 0000000000000003
</TASK>
Allocated by task 1:
__kasan_krealloc+0x131/0x1c0
krealloc+0x90/0xc0
add_sysfs_param+0xcb/0x8a0
kernel_add_sysfs_param+0x81/0xd4
param_sysfs_builtin+0x138/0x1a6
param_sysfs_init+0x57/0x5b
do_one_initcall+0x104/0x250
do_initcall_level+0x102/0x132
do_initcalls+0x46/0x74
kernel_init_freeable+0x28f/0x393
kernel_init+0x14/0x1a0
ret_from_fork+0x22/0x30
The buggy address belongs to the object at ffff888014114000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1620 bytes to the right of
2048-byte region [ffff888014114000, ffff888014114800]
The buggy address belongs to the physical page:
page:ffffea0000504400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14110
head:ffffea0000504400 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head|node=0|zone=1)
raw: 0100000000010200 0000000000000000 dead000000000001 ffff888013442000
raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
==================================================================
This happens because the TBI check unconditionally dereferences the last
byte without validating the reported length first:
u8 last_byte = *(data + length - 1);
Fix by rejecting the frame early if the length is zero, or if it exceeds
adapter->rx_buffer_len. This preserves the TBI workaround semantics for
valid frames and prevents touching memory beyond the RX buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: 8192cu: fix tid out of range in rtl92cu_tx_fill_desc()
TID getting from ieee80211_get_tid() might be out of range of array size
of sta_entry->tids[], so check TID is less than MAX_TID_COUNT. Othwerwise,
UBSAN warn:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:514:30
index 10 is out of range for type 'rtl_tid_data [9]' |
| pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in version 22.0.0 and prior to version 26.0.0, if a user provided callback to `set_cookie_generate_callback` returned a cookie value greater than 256 bytes, pyOpenSSL would overflow an OpenSSL provided buffer. Starting in version 26.0.0, cookie values that are too long are now rejected. |
| The issue was addressed with improved bounds checks. This issue is fixed in Keynote 15.1, iOS 26 and iPadOS 26, macOS Tahoe 26. Processing a maliciously crafted Keynote file may disclose memory contents. |
| A vulnerability was found in Tenda F453 1.0.0.3. This vulnerability affects the function fromSafeClientFilter of the file /goform/SafeClientFilter of the component Parameters Handler. Performing a manipulation of the argument menufacturer/Go results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. |
| A vulnerability was determined in Tenda F453 1.0.0.3. This issue affects the function fromVirtualSer of the file /goform/VirtualSer of the component Parameters Handler. Executing a manipulation of the argument page can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was identified in Tenda F453 1.0.0.3. Impacted is the function fromNatlimit of the file /goform/Natlimit of the component Parameters Handler. The manipulation of the argument page leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. |
| A weakness has been identified in D-Link DIR-513 1.10. The impacted element is the function formEasySetTimezone of the file /goform/formEasySetTimezone of the component boa. This manipulation of the argument curTime causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was detected in Tenda AC21 16.03.08.16. Impacted is the function formSetQosBand of the file /goform/SetNetControlList. Performing a manipulation of the argument list results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used. |
| A flaw has been found in Belkin F9K1122 1.00.33. The affected element is the function formWISP5G of the file /goform/formWISP5G. Executing a manipulation of the argument webpage can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Tenda A15 15.13.07.13. The impacted element is the function UploadCfg of the file /cgi-bin/UploadCfg. The manipulation of the argument File leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| Versions of the package jsrsasign before 11.1.1 are vulnerable to Infinite loop via the bnModInverse function in ext/jsbn2.js when the BigInteger.modInverse implementation receives zero or negative inputs, allowing an attacker to hang the process permanently by supplying such crafted values (e.g., modInverse(0, m) or modInverse(-1, m)). |
| A flaw was found in the GNU Binutils BFD library, a widely used component for handling binary files such as object files and executables. The issue occurs when processing specially crafted XCOFF object files, where a relocation type value is not properly validated before being used. This can cause the program to read memory outside of intended bounds. As a result, affected tools may crash or expose unintended memory contents, leading to denial-of-service or limited information disclosure risks. |
| Paint Studio 2.17 contains a denial of service vulnerability that allows local attackers to crash the application by providing malformed input through the key entry mechanism. Attackers can create a text file with a large buffer of characters and trigger the application to read it, causing the application to crash and become unavailable. |
| Pidgin 2.13.0 contains a denial of service vulnerability that allows local attackers to crash the application by providing an excessively long username string during account creation. Attackers can input a buffer of 1000 characters in the username field and trigger a crash when joining a chat, causing the application to become unavailable. |
| Sandboxie 5.30 contains a denial of service vulnerability that allows local attackers to crash the application by supplying an excessively long string in the Program Alerts configuration field. Attackers can paste a buffer of 5000 characters into the 'Select or enter a program' field during program alert configuration to trigger an application crash. |
| SpotPaltalk 1.1.5 contains a denial of service vulnerability in the registration code input field that allows local attackers to crash the application by submitting an excessively long string. Attackers can paste a buffer of 1000 characters into the Name/Key field during registration to trigger a crash when the OK button is clicked. |
| RealTerm Serial Terminal 2.0.0.70 contains a denial of service vulnerability that allows local attackers to crash the application by supplying an excessively long string in the Port field. Attackers can paste a buffer of 1000 characters into the Port input field and click the open button to trigger a crash. |
| NordVPN 6.19.6 contains a denial of service vulnerability that allows local attackers to crash the application by submitting an excessively long string in the email input field. Attackers can paste a buffer of 100,000 characters into the email field during login to trigger an application crash. |
| A vulnerability was identified in D-Link DHP-1320 1.00WWB04. This affects the function redirect_count_down_page of the component SOAP Handler. Such manipulation leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer. |
