| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mipi-dsi: Detach devices when removing the host
Whenever the MIPI-DSI host is unregistered, the code of
mipi_dsi_host_unregister() loops over every device currently found on that
bus and will unregister it.
However, it doesn't detach it from the bus first, which leads to all kind
of resource leaks if the host wants to perform some clean up whenever a
device is detached. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/net/ethernet/ti/netcp_core.c:1944:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = netcp_ndo_start_xmit,
^~~~~~~~~~~~~~~~~~~~
1 error generated.
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of
netcp_ndo_start_xmit() to match the prototype's to resolve the warning
and CFI failure. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode
There are many places that will get unhappy (and crash) when ext4_iget()
returns a bad inode. However, if iget the boot loader inode, allows a bad
inode to be returned, because the inode may not be initialized. This
mechanism can be used to bypass some checks and cause panic. To solve this
problem, we add a special iget flag EXT4_IGET_BAD. Only with this flag
we'd be returning bad inode from ext4_iget(), otherwise we always return
the error code if the inode is bad inode.(suggested by Jan Kara) |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in is_valid_oplock_break()
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/MSI: Fix UAF in msi_capability_init
KFENCE reports the following UAF:
BUG: KFENCE: use-after-free read in __pci_enable_msi_range+0x2c0/0x488
Use-after-free read at 0x0000000024629571 (in kfence-#12):
__pci_enable_msi_range+0x2c0/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
kfence-#12: 0x0000000008614900-0x00000000e06c228d, size=104, cache=kmalloc-128
allocated by task 81 on cpu 7 at 10.808142s:
__kmem_cache_alloc_node+0x1f0/0x2bc
kmalloc_trace+0x44/0x138
msi_alloc_desc+0x3c/0x9c
msi_domain_insert_msi_desc+0x30/0x78
msi_setup_msi_desc+0x13c/0x184
__pci_enable_msi_range+0x258/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
freed by task 81 on cpu 7 at 10.811436s:
msi_domain_free_descs+0xd4/0x10c
msi_domain_free_locked.part.0+0xc0/0x1d8
msi_domain_alloc_irqs_all_locked+0xb4/0xbc
pci_msi_setup_msi_irqs+0x30/0x4c
__pci_enable_msi_range+0x2a8/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
Descriptor allocation done in:
__pci_enable_msi_range
msi_capability_init
msi_setup_msi_desc
msi_insert_msi_desc
msi_domain_insert_msi_desc
msi_alloc_desc
...
Freed in case of failure in __msi_domain_alloc_locked()
__pci_enable_msi_range
msi_capability_init
pci_msi_setup_msi_irqs
msi_domain_alloc_irqs_all_locked
msi_domain_alloc_locked
__msi_domain_alloc_locked => fails
msi_domain_free_locked
...
That failure propagates back to pci_msi_setup_msi_irqs() in
msi_capability_init() which accesses the descriptor for unmasking in the
error exit path.
Cure it by copying the descriptor and using the copy for the error exit path
unmask operation.
[ tglx: Massaged change log ] |
| In the Linux kernel, the following vulnerability has been resolved:
cdrom: rearrange last_media_change check to avoid unintentional overflow
When running syzkaller with the newly reintroduced signed integer wrap
sanitizer we encounter this splat:
[ 366.015950] UBSAN: signed-integer-overflow in ../drivers/cdrom/cdrom.c:2361:33
[ 366.021089] -9223372036854775808 - 346321 cannot be represented in type '__s64' (aka 'long long')
[ 366.025894] program syz-executor.4 is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 366.027502] CPU: 5 PID: 28472 Comm: syz-executor.7 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1
[ 366.027512] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 366.027518] Call Trace:
[ 366.027523] <TASK>
[ 366.027533] dump_stack_lvl+0x93/0xd0
[ 366.027899] handle_overflow+0x171/0x1b0
[ 366.038787] ata1.00: invalid multi_count 32 ignored
[ 366.043924] cdrom_ioctl+0x2c3f/0x2d10
[ 366.063932] ? __pm_runtime_resume+0xe6/0x130
[ 366.071923] sr_block_ioctl+0x15d/0x1d0
[ 366.074624] ? __pfx_sr_block_ioctl+0x10/0x10
[ 366.077642] blkdev_ioctl+0x419/0x500
[ 366.080231] ? __pfx_blkdev_ioctl+0x10/0x10
...
Historically, the signed integer overflow sanitizer did not work in the
kernel due to its interaction with `-fwrapv` but this has since been
changed [1] in the newest version of Clang. It was re-enabled in the
kernel with Commit 557f8c582a9ba8ab ("ubsan: Reintroduce signed overflow
sanitizer").
Let's rearrange the check to not perform any arithmetic, thus not
tripping the sanitizer. |
| A flaw was found in the ATA over Ethernet (AoE) driver in the Linux kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on `struct net_device`, and a use-after-free can be triggered by racing between the free on the struct and the access through the `skbtxq` global queue. This could lead to a denial of service condition or potential code execution. |
| A use-after-free vulnerability was found in drivers/nvme/target/tcp.c` in `nvmet_tcp_free_crypto` due to a logical bug in the NVMe/TCP subsystem in the Linux kernel. This issue may allow a malicious user to cause a use-after-free and double-free problem, which may permit remote code execution or lead to local privilege escalation. |
| A flaw was found in the Linux kernel's TUN/TAP functionality. This issue could allow a local user to bypass network filters and gain unauthorized access to some resources. The original patches fixing CVE-2023-1076 are incorrect or incomplete. The problem is that the following upstream commits - a096ccca6e50 ("tun: tun_chr_open(): correctly initialize socket uid"), - 66b2c338adce ("tap: tap_open(): correctly initialize socket uid"), pass "inode->i_uid" to sock_init_data_uid() as the last parameter and that turns out to not be accurate. |
| A race condition was found in the QXL driver in the Linux kernel. The qxl_mode_dumb_create() function dereferences the qobj returned by the qxl_gem_object_create_with_handle(), but the handle is the only one holding a reference to it. This flaw allows an attacker to guess the returned handle value and trigger a use-after-free issue, potentially leading to a denial of service or privilege escalation. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: fix infinite loop in attr_load_runs_range on inconsistent metadata
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an attribute header
indicates an empty run list, while directory entries reference it as
containing actual data. In NTFS, setting evcn=-1 with svcn=0 is a valid way
to represent an empty run list, and run_unpack() correctly handles this by
checking if evcn + 1 equals svcn and returning early without parsing any run
data. However, this creates a problem when there is metadata inconsistency,
where the attribute header claims to be empty (evcn=-1) but the caller
expects to read actual data. When run_unpack() immediately returns success
upon seeing this condition, it leaves the runs_tree uninitialized with
run->runs as a NULL. The calling function attr_load_runs_range() assumes
that a successful return means that the runs were loaded and sets clen to 0,
expecting the next run_lookup_entry() call to succeed. Because runs_tree
remains uninitialized, run_lookup_entry() continues to fail, and the loop
increments vcn by zero (vcn += 0), leading to an infinite loop.
This patch adds a retry counter to detect when run_lookup_entry() fails
consecutively after attr_load_runs_vcn(). If the run is still not found on
the second attempt, it indicates corrupted metadata and returns -EINVAL,
preventing the Denial-of-Service (DoS) vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: check return value of indx_find to avoid infinite loop
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed dentry in the ntfs3 filesystem can cause the kernel to hang
during the lookup operations. By setting the HAS_SUB_NODE flag in an
INDEX_ENTRY within a directory's INDEX_ALLOCATION block and manipulating the
VCN pointer, an attacker can cause the indx_find() function to repeatedly
read the same block, allocating 4 KB of memory each time. The kernel lacks
VCN loop detection and depth limits, causing memory exhaustion and an OOM
crash.
This patch adds a return value check for fnd_push() to prevent a memory
exhaustion vulnerability caused by infinite loops. When the index exceeds the
size of the fnd->nodes array, fnd_push() returns -EINVAL. The indx_find()
function checks this return value and stops processing, preventing further
memory allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umad: Reject negative data_len in ib_umad_write
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80 |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: check for deleted cursors when revalidating two btrees
The free space and inode btree repair functions will rebuild both btrees
at the same time, after which it needs to evaluate both btrees to
confirm that the corruptions are gone.
However, Jiaming Zhang ran syzbot and produced a crash in the second
xchk_allocbt call. His root-cause analysis is as follows (with minor
corrections):
In xrep_revalidate_allocbt(), xchk_allocbt() is called twice (first
for BNOBT, second for CNTBT). The cause of this issue is that the
first call nullified the cursor required by the second call.
Let's first enter xrep_revalidate_allocbt() via following call chain:
xfs_file_ioctl() ->
xfs_ioc_scrubv_metadata() ->
xfs_scrub_metadata() ->
`sc->ops->repair_eval(sc)` ->
xrep_revalidate_allocbt()
xchk_allocbt() is called twice in this function. In the first call:
/* Note that sc->sm->sm_type is XFS_SCRUB_TYPE_BNOPT now */
xchk_allocbt() ->
xchk_btree() ->
`bs->scrub_rec(bs, recp)` ->
xchk_allocbt_rec() ->
xchk_allocbt_xref() ->
xchk_allocbt_xref_other()
since sm_type is XFS_SCRUB_TYPE_BNOBT, pur is set to &sc->sa.cnt_cur.
Kernel called xfs_alloc_get_rec() and returned -EFSCORRUPTED. Call
chain:
xfs_alloc_get_rec() ->
xfs_btree_get_rec() ->
xfs_btree_check_block() ->
(XFS_IS_CORRUPT || XFS_TEST_ERROR), the former is false and the latter
is true, return -EFSCORRUPTED. This should be caused by
ioctl$XFS_IOC_ERROR_INJECTION I guess.
Back to xchk_allocbt_xref_other(), after receiving -EFSCORRUPTED from
xfs_alloc_get_rec(), kernel called xchk_should_check_xref(). In this
function, *curpp (points to sc->sa.cnt_cur) is nullified.
Back to xrep_revalidate_allocbt(), since sc->sa.cnt_cur has been
nullified, it then triggered null-ptr-deref via xchk_allocbt() (second
call) -> xchk_btree().
So. The bnobt revalidation failed on a cross-reference attempt, so we
deleted the cntbt cursor, and then crashed when we tried to revalidate
the cntbt. Therefore, check for a null cntbt cursor before that
revalidation, and mark the repair incomplete. Also we can ignore the
second tree entirely if the first tree was rebuilt but is already
corrupt.
Apply the same fix to xrep_revalidate_iallocbt because it has the same
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix page array leak
d9f595b9a65e ("io_uring/zcrx: fix leaking pages on sg init fail") fixed
a page leakage but didn't free the page array, release it as well. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: add missing syscalls to read class
The "at" variant of getxattr() and listxattr() are missing from the
audit read class. Calling getxattrat() or listxattrat() on a file to
read its extended attributes will bypass audit rules such as:
-w /tmp/test -p rwa -k test_rwa
The current patch adds missing syscalls to the audit read class. |
| Server-Side Request Forgery (SSRF) vulnerability in Salesforce Tableau Server on Windows, Linux (Amazon S3 Connector modules) allows Resource Location Spoofing. This issue affects Tableau Server: before 2025.1.3, before 2024.2.12, before 2023.3.19. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: mark requests for GuC virtual engines to avoid use-after-free
References to i915_requests may be trapped by userspace inside a
sync_file or dmabuf (dma-resv) and held indefinitely across different
proceses. To counter-act the memory leaks, we try to not to keep
references from the request past their completion.
On the other side on fence release we need to know if rq->engine
is valid and points to hw engine (true for non-virtual requests).
To make it possible extra bit has been added to rq->execution_mask,
for marking virtual engines.
(cherry picked from commit 280410677af763f3871b93e794a199cfcf6fb580) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Rework long task execution when adding/deleting entries
When adding/deleting large number of elements in one step in ipset, it can
take a reasonable amount of time and can result in soft lockup errors. The
patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of
consecutive elements to add/delete") tried to fix it by limiting the max
elements to process at all. However it was not enough, it is still possible
that we get hung tasks. Lowering the limit is not reasonable, so the
approach in this patch is as follows: rely on the method used at resizing
sets and save the state when we reach a smaller internal batch limit,
unlock/lock and proceed from the saved state. Thus we can avoid long
continuous tasks and at the same time removed the limit to add/delete large
number of elements in one step.
The nfnl mutex is held during the whole operation which prevents one to
issue other ipset commands in parallel. |
