| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: fix use-after-free in mana_hwc_destroy_channel() by reordering teardown
A potential race condition exists in mana_hwc_destroy_channel() where
hwc->caller_ctx is freed before the HWC's Completion Queue (CQ) and
Event Queue (EQ) are destroyed. This allows an in-flight CQ interrupt
handler to dereference freed memory, leading to a use-after-free or
NULL pointer dereference in mana_hwc_handle_resp().
mana_smc_teardown_hwc() signals the hardware to stop but does not
synchronize against IRQ handlers already executing on other CPUs. The
IRQ synchronization only happens in mana_hwc_destroy_cq() via
mana_gd_destroy_eq() -> mana_gd_deregister_irq(). Since this runs
after kfree(hwc->caller_ctx), a concurrent mana_hwc_rx_event_handler()
can dereference freed caller_ctx (and rxq->msg_buf) in
mana_hwc_handle_resp().
Fix this by reordering teardown to reverse-of-creation order: destroy
the TX/RX work queues and CQ/EQ before freeing hwc->caller_ctx. This
ensures all in-flight interrupt handlers complete before the memory they
access is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rose: fix NULL pointer dereference in rose_transmit_link on reconnect
syzkaller reported a bug [1], and the reproducer is available at [2].
ROSE sockets use four sk->sk_state values: TCP_CLOSE, TCP_LISTEN,
TCP_SYN_SENT, and TCP_ESTABLISHED. rose_connect() already rejects
calls for TCP_ESTABLISHED (-EISCONN) and TCP_CLOSE with SS_CONNECTING
(-ECONNREFUSED), but lacks a check for TCP_SYN_SENT.
When rose_connect() is called a second time while the first connection
attempt is still in progress (TCP_SYN_SENT), it overwrites
rose->neighbour via rose_get_neigh(). If that returns NULL, the socket
is left with rose->state == ROSE_STATE_1 but rose->neighbour == NULL.
When the socket is subsequently closed, rose_release() sees
ROSE_STATE_1 and calls rose_write_internal() ->
rose_transmit_link(skb, NULL), causing a NULL pointer dereference.
Per connect(2), a second connect() while a connection is already in
progress should return -EALREADY. Add this missing check for
TCP_SYN_SENT to complete the state validation in rose_connect().
[1] https://syzkaller.appspot.com/bug?extid=d00f90e0af54102fb271
[2] https://gist.github.com/mrpre/9e6779e0d13e2c66779b1653fef80516 |
| In the Linux kernel, the following vulnerability has been resolved:
soc: fsl: qbman: fix race condition in qman_destroy_fq
When QMAN_FQ_FLAG_DYNAMIC_FQID is set, there's a race condition between
fq_table[fq->idx] state and freeing/allocating from the pool and
WARN_ON(fq_table[fq->idx]) in qman_create_fq() gets triggered.
Indeed, we can have:
Thread A Thread B
qman_destroy_fq() qman_create_fq()
qman_release_fqid()
qman_shutdown_fq()
gen_pool_free()
-- At this point, the fqid is available again --
qman_alloc_fqid()
-- so, we can get the just-freed fqid in thread B --
fq->fqid = fqid;
fq->idx = fqid * 2;
WARN_ON(fq_table[fq->idx]);
fq_table[fq->idx] = fq;
fq_table[fq->idx] = NULL;
And adding some logs between qman_release_fqid() and
fq_table[fq->idx] = NULL makes the WARN_ON() trigger a lot more.
To prevent that, ensure that fq_table[fq->idx] is set to NULL before
gen_pool_free() is called by using smp_wmb(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: shaper: protect late read accesses to the hierarchy
We look up a netdev during prep of Netlink ops (pre- callbacks)
and take a ref to it. Then later in the body of the callback
we take its lock or RCU which are the actual protections.
This is not proper, a conversion from a ref to a locked netdev
must include a liveness check (a check if the netdev hasn't been
unregistered already). Fix the read cases (those under RCU).
Writes needs a separate change to protect from creating the
hierarchy after flush has already run. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg-prueth: Fix memory leak in XDP_DROP for non-zero-copy mode
Page recycling was removed from the XDP_DROP path in emac_run_xdp() to
avoid conflicts with AF_XDP zero-copy mode, which uses xsk_buff_free()
instead.
However, this causes a memory leak when running XDP programs that drop
packets in non-zero-copy mode (standard page pool mode). The pages are
never returned to the page pool, leading to OOM conditions.
Fix this by handling cleanup in the caller, emac_rx_packet().
When emac_run_xdp() returns ICSSG_XDP_CONSUMED for XDP_DROP, the
caller now recycles the page back to the page pool. The zero-copy
path, emac_rx_packet_zc() already handles cleanup correctly with
xsk_buff_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix Content-Length u32 truncation in sip_help_tcp()
sip_help_tcp() parses the SIP Content-Length header with
simple_strtoul(), which returns unsigned long, but stores the result in
unsigned int clen. On 64-bit systems, values exceeding UINT_MAX are
silently truncated before computing the SIP message boundary.
For example, Content-Length 4294967328 (2^32 + 32) is truncated to 32,
causing the parser to miscalculate where the current message ends. The
loop then treats trailing data in the TCP segment as a second SIP
message and processes it through the SDP parser.
Fix this by changing clen to unsigned long to match the return type of
simple_strtoul(), and reject Content-Length values that exceed the
remaining TCP payload length. |
| Juju is an open source application orchestration engine that enables any application operation on any infrastructure at any scale through special operators called ‘charms’. From versions 2.9 to before 2.9.56 and 3.6 to before 3.6.19, it is possible that a compromised workload machine under a Juju controller can read any log file for any entity in any model at any level. This issue has been patched in versions 2.9.56 and 3.6.19. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix race condition during IPSec ESN update
In IPSec full offload mode, the device reports an ESN (Extended
Sequence Number) wrap event to the driver. The driver validates this
event by querying the IPSec ASO and checking that the esn_event_arm
field is 0x0, which indicates an event has occurred. After handling
the event, the driver must re-arm the context by setting esn_event_arm
back to 0x1.
A race condition exists in this handling path. After validating the
event, the driver calls mlx5_accel_esp_modify_xfrm() to update the
kernel's xfrm state. This function temporarily releases and
re-acquires the xfrm state lock.
So, need to acknowledge the event first by setting esn_event_arm to
0x1. This prevents the driver from reprocessing the same ESN update if
the hardware sends events for other reason. Since the next ESN update
only occurs after nearly 2^31 packets are received, there's no risk of
missing an update, as it will happen long after this handling has
finished.
Processing the event twice causes the ESN high-order bits (esn_msb) to
be incremented incorrectly. The driver then programs the hardware with
this invalid ESN state, which leads to anti-replay failures and a
complete halt of IPSec traffic.
Fix this by re-arming the ESN event immediately after it is validated,
before calling mlx5_accel_esp_modify_xfrm(). This ensures that any
spurious, duplicate events are correctly ignored, closing the race
window. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent concurrent access to IPSec ASO context
The query or updating IPSec offload object is through Access ASO WQE.
The driver uses a single mlx5e_ipsec_aso struct for each PF, which
contains a shared DMA-mapped context for all ASO operations.
A race condition exists because the ASO spinlock is released before
the hardware has finished processing WQE. If a second operation is
initiated immediately after, it overwrites the shared context in the
DMA area.
When the first operation's completion is processed later, it reads
this corrupted context, leading to unexpected behavior and incorrect
results.
This commit fixes the race by introducing a private context within
each IPSec offload object. The shared ASO context is now copied to
this private context while the ASO spinlock is held. Subsequent
processing uses this saved, per-object context, ensuring its integrity
is maintained. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: fix use-after-free in ctnetlink_dump_exp_ct()
ctnetlink_dump_exp_ct() stores a conntrack pointer in cb->data for the
netlink dump callback ctnetlink_exp_ct_dump_table(), but drops the
conntrack reference immediately after netlink_dump_start(). When the
dump spans multiple rounds, the second recvmsg() triggers the dump
callback which dereferences the now-freed conntrack via nfct_help(ct),
leading to a use-after-free on ct->ext.
The bug is that the netlink_dump_control has no .start or .done
callbacks to manage the conntrack reference across dump rounds. Other
dump functions in the same file (e.g. ctnetlink_get_conntrack) properly
use .start/.done callbacks for this purpose.
Fix this by adding .start and .done callbacks that hold and release the
conntrack reference for the duration of the dump, and move the
nfct_help() call after the cb->args[0] early-return check in the dump
callback to avoid dereferencing ct->ext unnecessarily.
BUG: KASAN: slab-use-after-free in ctnetlink_exp_ct_dump_table+0x4f/0x2e0
Read of size 8 at addr ffff88810597ebf0 by task ctnetlink_poc/133
CPU: 1 UID: 0 PID: 133 Comm: ctnetlink_poc Not tainted 7.0.0-rc2+ #3 PREEMPTLAZY
Call Trace:
<TASK>
ctnetlink_exp_ct_dump_table+0x4f/0x2e0
netlink_dump+0x333/0x880
netlink_recvmsg+0x3e2/0x4b0
? aa_sk_perm+0x184/0x450
sock_recvmsg+0xde/0xf0
Allocated by task 133:
kmem_cache_alloc_noprof+0x134/0x440
__nf_conntrack_alloc+0xa8/0x2b0
ctnetlink_create_conntrack+0xa1/0x900
ctnetlink_new_conntrack+0x3cf/0x7d0
nfnetlink_rcv_msg+0x48e/0x510
netlink_rcv_skb+0xc9/0x1f0
nfnetlink_rcv+0xdb/0x220
netlink_unicast+0x3ec/0x590
netlink_sendmsg+0x397/0x690
__sys_sendmsg+0xf4/0x180
Freed by task 0:
slab_free_after_rcu_debug+0xad/0x1e0
rcu_core+0x5c3/0x9c0 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix use-after-free in l2cap_unregister_user
After commit ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in
hci_chan_del"), l2cap_conn_del() uses conn->lock to protect access to
conn->users. However, l2cap_register_user() and l2cap_unregister_user()
don't use conn->lock, creating a race condition where these functions can
access conn->users and conn->hchan concurrently with l2cap_conn_del().
This can lead to use-after-free and list corruption bugs, as reported
by syzbot.
Fix this by changing l2cap_register_user() and l2cap_unregister_user()
to use conn->lock instead of hci_dev_lock(), ensuring consistent locking
for the l2cap_conn structure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Synchronize interrupts before suspending the GPU
The runtime PM suspend callback doesn't know whether the IRQ handler is
in progress on a different CPU core and doesn't wait for it to finish.
Depending on timing, the IRQ handler could be running while the GPU is
suspended, leading to kernel crashes when trying to access GPU
registers. See example signature below.
In a power off sequence initiated by the runtime PM suspend callback,
wait for any IRQ handlers in progress on other CPU cores to finish, by
calling synchronize_irq().
At the same time, remove the runtime PM resume/put calls in the threaded
IRQ handler. On top of not being the right approach to begin with, and
being at the wrong place as they should have wrapped all GPU register
accesses, the driver would hit a deadlock between synchronize_irq()
being called from a runtime PM suspend callback, holding the device
power lock, and the resume callback requiring the same.
Example crash signature on a TI AM68 SK platform:
[ 337.241218] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError
[ 337.241239] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT
[ 337.241246] Tainted: [M]=MACHINE_CHECK
[ 337.241249] Hardware name: Texas Instruments AM68 SK (DT)
[ 337.241252] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 337.241256] pc : pvr_riscv_irq_pending+0xc/0x24
[ 337.241277] lr : pvr_device_irq_thread_handler+0x64/0x310
[ 337.241282] sp : ffff800085b0bd30
[ 337.241284] x29: ffff800085b0bd50 x28: ffff0008070d9eab x27: ffff800083a5ce10
[ 337.241291] x26: ffff000806e48f80 x25: ffff0008070d9eac x24: 0000000000000000
[ 337.241296] x23: ffff0008068e9bf0 x22: ffff0008068e9bd0 x21: ffff800085b0bd30
[ 337.241301] x20: ffff0008070d9e00 x19: ffff0008068e9000 x18: 0000000000000001
[ 337.241305] x17: 637365645f656c70 x16: 0000000000000000 x15: ffff000b7df9ff40
[ 337.241310] x14: 0000a585fe3c0d0e x13: 000000999704f060 x12: 000000000002771a
[ 337.241314] x11: 00000000000000c0 x10: 0000000000000af0 x9 : ffff800085b0bd00
[ 337.241318] x8 : ffff0008071175d0 x7 : 000000000000b955 x6 : 0000000000000003
[ 337.241323] x5 : 0000000000000000 x4 : 0000000000000002 x3 : 0000000000000000
[ 337.241327] x2 : ffff800080e39d20 x1 : ffff800080e3fc48 x0 : 0000000000000000
[ 337.241333] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 337.241337] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT
[ 337.241342] Tainted: [M]=MACHINE_CHECK
[ 337.241343] Hardware name: Texas Instruments AM68 SK (DT)
[ 337.241345] Call trace:
[ 337.241348] show_stack+0x18/0x24 (C)
[ 337.241357] dump_stack_lvl+0x60/0x80
[ 337.241364] dump_stack+0x18/0x24
[ 337.241368] vpanic+0x124/0x2ec
[ 337.241373] abort+0x0/0x4
[ 337.241377] add_taint+0x0/0xbc
[ 337.241384] arm64_serror_panic+0x70/0x80
[ 337.241389] do_serror+0x3c/0x74
[ 337.241392] el1h_64_error_handler+0x30/0x48
[ 337.241400] el1h_64_error+0x6c/0x70
[ 337.241404] pvr_riscv_irq_pending+0xc/0x24 (P)
[ 337.241410] irq_thread_fn+0x2c/0xb0
[ 337.241416] irq_thread+0x170/0x334
[ 337.241421] kthread+0x12c/0x210
[ 337.241428] ret_from_fork+0x10/0x20
[ 337.241434] SMP: stopping secondary CPUs
[ 337.241451] Kernel Offset: disabled
[ 337.241453] CPU features: 0x040000,02002800,20002001,0400421b
[ 337.241456] Memory Limit: none
[ 337.457921] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Fix use-after-free on framebuffers and property blobs when calling drm_dev_unplug
When trying to do a rather aggressive test of igt's "xe_module_load
--r reload" with a full desktop environment and game running I noticed
a few OOPSes when dereferencing freed pointers, related to
framebuffers and property blobs after the compositor exits.
Solve this by guarding the freeing in drm_file with drm_dev_enter/exit,
and immediately put the references from struct drm_file objects during
drm_dev_unplug().
Related warnings for framebuffers on the subtest:
[ 739.713076] ------------[ cut here ]------------
WARN_ON(!list_empty(&dev->mode_config.fb_list))
[ 739.713079] WARNING: drivers/gpu/drm/drm_mode_config.c:584 at drm_mode_config_cleanup+0x30b/0x320 [drm], CPU#12: xe_module_load/13145
....
[ 739.713328] Call Trace:
[ 739.713330] <TASK>
[ 739.713335] ? intel_pmdemand_destroy_state+0x11/0x20 [xe]
[ 739.713574] ? intel_atomic_global_obj_cleanup+0xe4/0x1a0 [xe]
[ 739.713794] intel_display_driver_remove_noirq+0x51/0xb0 [xe]
[ 739.714041] xe_display_fini_early+0x33/0x50 [xe]
[ 739.714284] devm_action_release+0xf/0x20
[ 739.714294] devres_release_all+0xad/0xf0
[ 739.714301] device_unbind_cleanup+0x12/0xa0
[ 739.714305] device_release_driver_internal+0x1b7/0x210
[ 739.714311] device_driver_detach+0x14/0x20
[ 739.714315] unbind_store+0xa6/0xb0
[ 739.714319] drv_attr_store+0x21/0x30
[ 739.714322] sysfs_kf_write+0x48/0x60
[ 739.714328] kernfs_fop_write_iter+0x16b/0x240
[ 739.714333] vfs_write+0x266/0x520
[ 739.714341] ksys_write+0x72/0xe0
[ 739.714345] __x64_sys_write+0x19/0x20
[ 739.714347] x64_sys_call+0xa15/0xa30
[ 739.714355] do_syscall_64+0xd8/0xab0
[ 739.714361] entry_SYSCALL_64_after_hwframe+0x4b/0x53
and
[ 739.714459] ------------[ cut here ]------------
[ 739.714461] xe 0000:67:00.0: [drm] drm_WARN_ON(!list_empty(&fb->filp_head))
[ 739.714464] WARNING: drivers/gpu/drm/drm_framebuffer.c:833 at drm_framebuffer_free+0x6c/0x90 [drm], CPU#12: xe_module_load/13145
[ 739.714715] RIP: 0010:drm_framebuffer_free+0x7a/0x90 [drm]
...
[ 739.714869] Call Trace:
[ 739.714871] <TASK>
[ 739.714876] drm_mode_config_cleanup+0x26a/0x320 [drm]
[ 739.714998] ? __drm_printfn_seq_file+0x20/0x20 [drm]
[ 739.715115] ? drm_mode_config_cleanup+0x207/0x320 [drm]
[ 739.715235] intel_display_driver_remove_noirq+0x51/0xb0 [xe]
[ 739.715576] xe_display_fini_early+0x33/0x50 [xe]
[ 739.715821] devm_action_release+0xf/0x20
[ 739.715828] devres_release_all+0xad/0xf0
[ 739.715843] device_unbind_cleanup+0x12/0xa0
[ 739.715850] device_release_driver_internal+0x1b7/0x210
[ 739.715856] device_driver_detach+0x14/0x20
[ 739.715860] unbind_store+0xa6/0xb0
[ 739.715865] drv_attr_store+0x21/0x30
[ 739.715868] sysfs_kf_write+0x48/0x60
[ 739.715873] kernfs_fop_write_iter+0x16b/0x240
[ 739.715878] vfs_write+0x266/0x520
[ 739.715886] ksys_write+0x72/0xe0
[ 739.715890] __x64_sys_write+0x19/0x20
[ 739.715893] x64_sys_call+0xa15/0xa30
[ 739.715900] do_syscall_64+0xd8/0xab0
[ 739.715905] entry_SYSCALL_64_after_hwframe+0x4b/0x53
and then finally file close blows up:
[ 743.186530] Oops: general protection fault, probably for non-canonical address 0xdead000000000122: 0000 [#1] SMP
[ 743.186535] CPU: 3 UID: 1000 PID: 3453 Comm: kwin_wayland Tainted: G W 7.0.0-rc1-valkyria+ #110 PREEMPT_{RT,(lazy)}
[ 743.186537] Tainted: [W]=WARN
[ 743.186538] Hardware name: Gigabyte Technology Co., Ltd. X299 AORUS Gaming 3/X299 AORUS Gaming 3-CF, BIOS F8n 12/06/2021
[ 743.186539] RIP: 0010:drm_framebuffer_cleanup+0x55/0xc0 [drm]
[ 743.186588] Code: d8 72 73 0f b6 42 05 ff c3 39 c3 72 e8 49 8d bd 50 07 00 00 31 f6 e8 3a 80 d3 e1 49 8b 44 24 10 49 8d 7c 24 08 49 8b 54 24 08 <48> 3b 38 0f 85 95 7f 02 00 48 3b 7a 08 0f 85 8b 7f 02 00 48 89 42
[ 743.186589] RSP: 0018:ffffc900085e3cf8 EFLAGS: 00
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix statistics allocation
The controller per-cpu statistics is not allocated until after the
controller has been registered with driver core, which leaves a window
where accessing the sysfs attributes can trigger a NULL-pointer
dereference.
Fix this by moving the statistics allocation to controller allocation
while tying its lifetime to that of the controller (rather than using
implicit devres). |
| Budibase is an open-source low-code platform. Prior to version 3.23.25, a business logic vulnerability exists in Budibase’s password reset functionality due to the absence of rate limiting, CAPTCHA, or abuse prevention mechanisms on the “Forgot Password” endpoint. An unauthenticated attacker can repeatedly trigger password reset requests for the same email address, resulting in hundreds of password reset emails being sent in a short time window. This enables large-scale email flooding, user harassment, denial of service (DoS) against user inboxes, and potential financial and reputational impact for Budibase. This issue has been patched in version 3.23.25. |
| Piwigo is an open source photo gallery application for the web. Prior to version 16.3.0, a SQL Injection vulnerability exists in the pwg.users.getList Web Service API method. The filter parameter is directly concatenated into a SQL query without proper sanitization, allowing authenticated administrators to execute arbitrary SQL commands. This issue has been patched in version 16.3.0. |
| PraisonAI is a multi-agent teams system. Prior to version 4.5.90, the get_all_user_threads function constructs raw SQL queries using f-strings with unescaped thread IDs fetched from the database. An attacker stores a malicious thread ID via update_thread. When the application loads the thread list, the injected payload executes and grants full database access. This issue has been patched in version 4.5.90. |
| Budibase is an open-source low-code platform. Prior to version 3.33.4, the plugin file upload endpoint (POST /api/plugin/upload) passes the user-supplied filename directly to createTempFolder() without sanitizing path traversal sequences. An attacker with Global Builder privileges can craft a multipart upload with a filename containing ../ to delete arbitrary directories via rmSync and write arbitrary files via tarball extraction to any filesystem path the Node.js process can access. This issue has been patched in version 3.33.4. |
| Budibase is an open-source low-code platform. Prior to version 3.33.4, an unauthenticated attacker can achieve Remote Code Execution (RCE) on the Budibase server by triggering an automation that contains a Bash step via the public webhook endpoint. No authentication is required to trigger the exploit. The process executes as root inside the container. This issue has been patched in version 3.33.4. |
