| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy
For some reason, the driver adding support for Exynos5420 MIPI phy
back in 2016 wasn't used on Exynos5420, which caused a kernel panic.
Add the proper compatible for it. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix incomplete state save in rxe_requester
If a send packet is dropped by the IP layer in rxe_requester()
the call to rxe_xmit_packet() can fail with err == -EAGAIN.
To recover, the state of the wqe is restored to the state before
the packet was sent so it can be resent. However, the routines
that save and restore the state miss a significnt part of the
variable state in the wqe, the dma struct which is used to process
through the sge table. And, the state is not saved before the packet
is built which modifies the dma struct.
Under heavy stress testing with many QPs on a fast node sending
large messages to a slow node dropped packets are observed and
the resent packets are corrupted because the dma struct was not
restored. This patch fixes this behavior and allows the test cases
to succeed. |
| Shescape is a simple shell escape library for JavaScript. Prior to 2.1.10, Shescape#escape() does not escape square-bracket glob syntax for Bash, BusyBox sh, and Dash. Applications that interpolate the return value directly into a shell command string can cause an attacker-controlled value like secret[12] to expand into multiple filesystem matches instead of a single literal argument, turning one argument into multiple trusted-pathname matches. This vulnerability is fixed in 2.1.10. |
| AdGuard Home is a network-wide software for blocking ads and tracking. Prior to 0.107.73, an unauthenticated remote attacker can bypass all authentication in AdGuardHome by sending an HTTP/1.1 request that requests an upgrade to HTTP/2 cleartext (h2c). Once the upgrade is accepted, the resulting HTTP/2 connection is handled by the inner mux, which has no authentication middleware attached. All subsequent HTTP/2 requests on that connection are processed as fully authenticated, regardless of whether any credentials were provided. This vulnerability is fixed in 0.107.73. |
| Insufficient policy enforcement in PDF in Google Chrome on Android prior to 146.0.7680.71 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Incorrect security UI in Downloads in Google Chrome on Android prior to 146.0.7680.71 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) |
| Open Forms allows users create and publish smart forms. Prior to 3.3.13 and 3.4.5, to be able to cosign, the cosigner receives an e-mail with instructions or a deep-link to start the cosign flow. The submission reference is communicated so that the user can retrieve the submission to be cosigned. Attackers can guess a code or modify the received code to look up arbitrary submissions, after logging in (with DigiD/eHerkenning/... depending on form configuration). This vulnerability is fixed in 3.3.13 and 3.4.5. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 15.5 before 18.7.6, 18.8 before 18.8.6, and 18.9 before 18.9.2 that could have allowed an authenticated user with maintainer-role permissions to reveal Datadog API credentials under certain conditions. |
| Dell Alienware Command Center (AWCC), versions prior to 6.12.24.0, contain an Improper Access Control vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Denial of service. |
| Dell Alienware Command Center (AWCC), versions prior to 6.12.24.0, contain an Improper Privilege Management vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges. |
| Black is the uncompromising Python code formatter. Black provides a GitHub action for formatting code. This action supports an option, use_pyproject: true, for reading the version of Black to use from the repository pyproject.toml. A malicious pull request could edit pyproject.toml to use a direct URL reference to a malicious repository. This could lead to arbitrary code execution in the context of the GitHub Action. Attackers could then gain access to secrets or permissions available in the context of the action. Version 26.3.0 fixes this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: qfq: Use cl_is_active to determine whether class is active in qfq_rm_from_ag
This is more of a preventive patch to make the code more consistent and
to prevent possible exploits that employ child qlen manipulations on qfq.
use cl_is_active instead of relying on the child qdisc's qlen to determine
class activation. |
| In the Linux kernel, the following vulnerability has been resolved:
timekeeping: Adjust the leap state for the correct auxiliary timekeeper
When __do_ajdtimex() was introduced to handle adjtimex for any
timekeeper, this reference to tk_core was not updated. When called on an
auxiliary timekeeper, the core timekeeper would be updated incorrectly.
This gets caught by the lock debugging diagnostics because the
timekeepers sequence lock gets written to without holding its
associated spinlock:
WARNING: include/linux/seqlock.h:226 at __do_adjtimex+0x394/0x3b0, CPU#2: test/125
aux_clock_adj (kernel/time/timekeeping.c:2979)
__do_sys_clock_adjtime (kernel/time/posix-timers.c:1161 kernel/time/posix-timers.c:1173)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)
Update the correct auxiliary timekeeper. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: call ksmbd_session_rpc_close() on error path in create_smb2_pipe()
When ksmbd_iov_pin_rsp() fails, we should call ksmbd_session_rpc_close(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: ensure skb headroom before skb_push
This avoids occasional skb_under_panic Oops from wl1271_tx_work. In this case, headroom is
less than needed (typically 110 - 94 = 16 bytes). |
| In the Linux kernel, the following vulnerability has been resolved:
net: cpsw_new: Execute ndo_set_rx_mode callback in a work queue
Commit 1767bb2d47b7 ("ipv6: mcast: Don't hold RTNL for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this
change triggered the following call trace on my BeagleBone Black board:
WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/496
RTNL: assertion failed at net/8021q/vlan_core.c (236)
Modules linked in:
CPU: 0 UID: 997 PID: 496 Comm: rpcbind Not tainted 6.19.0-rc6-next-20260122-yocto-standard+ #8 PREEMPT
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x28/0x2c
show_stack from dump_stack_lvl+0x30/0x38
dump_stack_lvl from __warn+0xb8/0x11c
__warn from warn_slowpath_fmt+0x130/0x194
warn_slowpath_fmt from vlan_for_each+0x120/0x124
vlan_for_each from cpsw_add_mc_addr+0x54/0xd8
cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec
__hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88
__dev_mc_add from igmp6_group_added+0x84/0xec
igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0
__ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4
__ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168
do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8
ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c
do_sock_setsockopt from __sys_setsockopt+0x84/0xac
__sys_setsockopt from ret_fast_syscall+0x0/0x5
This trace occurs because vlan_for_each() is called within
cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held.
Since modifying vlan_for_each() to operate without the RTNL lock is not
straightforward, and because ndo_set_rx_mode() is invoked both with and
without the RTNL lock across different code paths, simply adding
rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution.
To resolve this issue, we opt to execute the actual processing within
a work queue, following the approach used by the icssg-prueth driver. |
| GNU Binutils thru 2.46 readelf contains a vulnerability that leads to an invalid pointer free when processing a crafted ELF binary with malformed relocation or symbol data. If dump_relocations returns early due to parsing errors, the internal all_relocations array may remain partially uninitialized. Later, process_got_section_contents() may attempt to free an invalid r_symbol pointer, triggering memory corruption checks in glibc and causing the program to terminate with SIGABRT. No evidence of further memory corruption or code execution was observed; the impact is limited to denial of service. NOTE: this is disputed by third parties because the observed behavior occurred only in pre-release code and did not affect any tagged version. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't WARN for connections on invalid channels
It's not clear (to me) how exactly syzbot managed to hit this,
but it seems conceivable that e.g. regulatory changed and has
disabled a channel between scanning (channel is checked to be
usable by cfg80211_get_ies_channel_number) and connecting on
the channel later.
With one scenario that isn't covered elsewhere described above,
the warning isn't good, replace it with a (more informative)
error message. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: restore swap_space attr aviod kernel panic
commit 8b47299a411a ("mm, swap: mark swap address space ro and add context
debug check") made the swap address space read-only. It may lead to
kernel panic if arch_prepare_to_swap returns a failure under heavy memory
pressure as follows,
el1_abort+0x40/0x64
el1h_64_sync_handler+0x48/0xcc
el1h_64_sync+0x84/0x88
errseq_set+0x4c/0xb8 (P)
__filemap_set_wb_err+0x20/0xd0
shrink_folio_list+0xc20/0x11cc
evict_folios+0x1520/0x1be4
try_to_shrink_lruvec+0x27c/0x3dc
shrink_one+0x9c/0x228
shrink_node+0xb3c/0xeac
do_try_to_free_pages+0x170/0x4f0
try_to_free_pages+0x334/0x534
__alloc_pages_direct_reclaim+0x90/0x158
__alloc_pages_slowpath+0x334/0x588
__alloc_frozen_pages_noprof+0x224/0x2fc
__folio_alloc_noprof+0x14/0x64
vma_alloc_zeroed_movable_folio+0x34/0x44
do_pte_missing+0xad4/0x1040
handle_mm_fault+0x4a4/0x790
do_page_fault+0x288/0x5f8
do_translation_fault+0x38/0x54
do_mem_abort+0x54/0xa8
Restore swap address space as not ro to avoid the panic. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Disable MMIO access during SMU Mode 1 reset
During Mode 1 reset, the ASIC undergoes a reset cycle and becomes
temporarily inaccessible via PCIe. Any attempt to access MMIO registers
during this window (e.g., from interrupt handlers or other driver threads)
can result in uncompleted PCIe transactions, leading to NMI panics or
system hangs.
To prevent this, set the `no_hw_access` flag to true immediately after
triggering the reset. This signals other driver components to skip
register accesses while the device is offline.
A memory barrier `smp_mb()` is added to ensure the flag update is
globally visible to all cores before the driver enters the sleep/wait
state.
(cherry picked from commit 7edb503fe4b6d67f47d8bb0dfafb8e699bb0f8a4) |
