| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Symantec Data Loss Prevention Windows Endpoint, prior to 25.1 MP1, 16.1 MP2, 16.0 RU2 HF9, 16.0 RU1 MP1 HF12, and 16.0 MP2 HF15, may be susceptible to a Elevation of Privilege vulnerability, which is a type of issue whereby an attacker may attempt to compromise the software application to gain elevated access to resources that are normally protected from an application or user. |
| Squid is a caching proxy for the Web. Prior to version 7.5, due to heap Use-After-Free, Squid is vulnerable to Denial of Service when handling ICP traffic. This problem allows a remote attacker to perform a reliable and repeatable Denial of Service attack against the Squid service using ICP protocol. This attack is limited to Squid deployments that explicitly enable ICP support (i.e. configure non-zero `icp_port`). This problem _cannot_ be mitigated by denying ICP queries using `icp_access` rules. Version 7.5 contains a patch. |
| lz4_flex is a pure Rust implementation of LZ4 compression/decompression. In versions 0.11.5 and below, and 0.12.0, decompressing invalid LZ4 data can leak sensitive information from uninitialized memory or from previous decompression operations. The library fails to properly validate offset values during LZ4 "match copy operations," allowing out-of-bounds reads from the output buffer. The block-based API functions (`decompress_into`, `decompress_into_with_dict`, and others when `safe-decode` is disabled) are affected, while all frame APIs are unaffected. The impact is potential exposure of sensitive data and secrets through crafted or malformed LZ4 input. This issue has been fixed in versions 0.11.6 and 0.12.1. |
| A flaw was found in virtio-win, specifically within the VirtIO Block (BLK) device. When the device undergoes a reset, it fails to properly manage memory, resulting in a use-after-free vulnerability. This issue could allow a local attacker to corrupt system memory, potentially leading to system instability or unexpected behavior. |
| LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. In versions 1.2.1 through 1.6.55, `png_set_tRNS` and `png_set_PLTE` each alias a heap-allocated buffer between `png_struct` and `png_info`, sharing a single allocation across two structs with independent lifetimes. The `trans_alpha` aliasing has been present since at least libpng 1.0, and the `palette` aliasing since at least 1.2.1. Both affect all prior release lines `png_set_tRNS` sets `png_ptr->trans_alpha = info_ptr->trans_alpha` (256-byte buffer) and `png_set_PLTE` sets `info_ptr->palette = png_ptr->palette` (768-byte buffer). In both cases, calling `png_free_data` (with `PNG_FREE_TRNS` or `PNG_FREE_PLTE`) frees the buffer through `info_ptr` while the corresponding `png_ptr` pointer remains dangling. Subsequent row-transform functions dereference and, in some code paths, write to the freed memory. A second call to `png_set_tRNS` or `png_set_PLTE` has the same effect, because both functions call `png_free_data` internally before reallocating the `info_ptr` buffer. Version 1.6.56 fixes the issue. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-18 and 6.9.13-43, due to an incorrect return value on certain platforms a pointer is incremented past the end of a buffer that is on the stack and that could result in an out of bounds write. Versions 7.1.2-18 and 6.9.13-43 patch the issue. |
| A flaw was found in p11-kit. A remote attacker could exploit this vulnerability by calling the C_DeriveKey function on a remote token with specific IBM kyber or IBM btc derive mechanism parameters set to NULL. This could lead to the RPC-client attempting to return an uninitialized value, potentially resulting in a NULL dereference or undefined behavior. This issue may cause an application level denial of service or other unpredictable system states. |
| A flaw was found in libsoup's SoupServer. A remote attacker could exploit a use-after-free vulnerability where the `soup_server_disconnect()` function frees connection objects prematurely, even if a TLS handshake is still pending. If the handshake completes after the connection object has been freed, a dangling pointer is accessed, leading to a server crash and a Denial of Service. |
| Wazuh provisioning scripts and Dockerfiles contain an insecure transport vulnerability where curl is invoked with the -k/--insecure flag, disabling SSL/TLS certificate validation. Attackers with network access can perform man-in-the-middle attacks to intercept and modify downloaded dependencies or code during the build process, leading to remote code execution and supply chain compromise. |
| Untrusted pointer dereference in Microsoft Office allows an unauthorized attacker to execute code locally. |
| Untrusted pointer dereference in Microsoft Office Excel allows an unauthorized attacker to execute code locally. |
| BPv7 dissector crash in Wireshark 4.6.0 allows denial of service |
| Kafka dissector crash in Wireshark 4.6.0 and 4.4.0 to 4.4.10 allows denial of service |
| SPRT dissector crash in Wireshark 4.2.0 to 4.0.5 and 4.0.0 to 4.0.15 allows denial of service via packet injection or crafted capture file |
| NTLMSSP dissector crash in Wireshark 4.2.0 to 4.0.6 and 4.0.0 to 4.0.16 allows denial of service via packet injection or crafted capture file |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix use-after-free in lbs_free_adapter()
The lbs_free_adapter() function uses timer_delete() (non-synchronous)
for both command_timer and tx_lockup_timer before the structure is
freed. This is incorrect because timer_delete() does not wait for
any running timer callback to complete.
If a timer callback is executing when lbs_free_adapter() is called,
the callback will access freed memory since lbs_cfg_free() frees the
containing structure immediately after lbs_free_adapter() returns.
Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler)
access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields,
which would all be use-after-free violations.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
This bug was introduced in commit 8f641d93c38a ("libertas: detect TX
lockups and reset hardware") where del_timer() was used instead of
del_timer_sync() in the cleanup path. The command_timer has had the
same issue since the driver was first written. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shim
The root cause of this bug is that when 'bpf_link_put' reduces the
refcount of 'shim_link->link.link' to zero, the resource is considered
released but may still be referenced via 'tr->progs_hlist' in
'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in
'bpf_shim_tramp_link_release' is deferred. During this window, another
process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'.
Based on Martin KaFai Lau's suggestions, I have created a simple patch.
To fix this:
Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'.
Only increment the refcount if it is not already zero.
Testing:
I verified the fix by adding a delay in
'bpf_shim_tramp_link_release' to make the bug easier to trigger:
static void bpf_shim_tramp_link_release(struct bpf_link *link)
{
/* ... */
if (!shim_link->trampoline)
return;
+ msleep(100);
WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link,
shim_link->trampoline, NULL));
bpf_trampoline_put(shim_link->trampoline);
}
Before the patch, running a PoC easily reproduced the crash(almost 100%)
with a call trace similar to KaiyanM's report.
After the patch, the bug no longer occurs even after millions of
iterations. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl: Fix race of nvdimm_bus object when creating nvdimm objects
Found issue during running of cxl-translate.sh unit test. Adding a 3s
sleep right before the test seems to make the issue reproduce fairly
consistently. The cxl_translate module has dependency on cxl_acpi and
causes orphaned nvdimm objects to reprobe after cxl_acpi is removed.
The nvdimm_bus object is registered by the cxl_nvb object when
cxl_acpi_probe() is called. With the nvdimm_bus object missing,
__nd_device_register() will trigger NULL pointer dereference when
accessing the dev->parent that points to &nvdimm_bus->dev.
[ 192.884510] BUG: kernel NULL pointer dereference, address: 000000000000006c
[ 192.895383] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20250812-19.fc42 08/12/2025
[ 192.897721] Workqueue: cxl_port cxl_bus_rescan_queue [cxl_core]
[ 192.899459] RIP: 0010:kobject_get+0xc/0x90
[ 192.924871] Call Trace:
[ 192.925959] <TASK>
[ 192.926976] ? pm_runtime_init+0xb9/0xe0
[ 192.929712] __nd_device_register.part.0+0x4d/0xc0 [libnvdimm]
[ 192.933314] __nvdimm_create+0x206/0x290 [libnvdimm]
[ 192.936662] cxl_nvdimm_probe+0x119/0x1d0 [cxl_pmem]
[ 192.940245] cxl_bus_probe+0x1a/0x60 [cxl_core]
[ 192.943349] really_probe+0xde/0x380
This patch also relies on the previous change where
devm_cxl_add_nvdimm_bridge() is called from drivers/cxl/pmem.c instead
of drivers/cxl/core.c to ensure the dependency of cxl_acpi on cxl_pmem.
1. Set probe_type of cxl_nvb to PROBE_FORCE_SYNCHRONOUS to ensure the
driver is probed synchronously when add_device() is called.
2. Add a check in __devm_cxl_add_nvdimm_bridge() to ensure that the
cxl_nvb driver is attached during cxl_acpi_probe().
3. Take the cxl_root uport_dev lock and the cxl_nvb->dev lock in
devm_cxl_add_nvdimm() before checking nvdimm_bus is valid.
4. Set cxl_nvdimm flag to CXL_NVD_F_INVALIDATED so cxl_nvdimm_probe()
will exit with -EBUSY.
The removal of cxl_nvdimm devices should prevent any orphaned devices
from probing once the nvdimm_bus is gone.
[ dj: Fixed 0-day reported kdoc issue. ]
[ dj: Fix cxl_nvb reference leak on error. Gregory (kreview-0811365) ] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: pidff: Fix condition effect bit clearing
As reported by MPDarkGuy on discord, NULL pointer dereferences were
happening because not all the conditional effects bits were cleared.
Properly clear all conditional effect bits from ffbit |
