Export limit exceeded: 342089 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (342089 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23417 | 1 Linux | 1 Linux Kernel | 2026-04-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix constant blinding for PROBE_MEM32 stores BPF_ST | BPF_PROBE_MEM32 immediate stores are not handled by bpf_jit_blind_insn(), allowing user-controlled 32-bit immediates to survive unblinded into JIT-compiled native code when bpf_jit_harden >= 1. The root cause is that convert_ctx_accesses() rewrites BPF_ST|BPF_MEM to BPF_ST|BPF_PROBE_MEM32 for arena pointer stores during verification, before bpf_jit_blind_constants() runs during JIT compilation. The blinding switch only matches BPF_ST|BPF_MEM (mode 0x60), not BPF_ST|BPF_PROBE_MEM32 (mode 0xa0). The instruction falls through unblinded. Add BPF_ST|BPF_PROBE_MEM32 cases to bpf_jit_blind_insn() alongside the existing BPF_ST|BPF_MEM cases. The blinding transformation is identical: load the blinded immediate into BPF_REG_AX via mov+xor, then convert the immediate store to a register store (BPF_STX). The rewritten STX instruction must preserve the BPF_PROBE_MEM32 mode so the architecture JIT emits the correct arena addressing (R12-based on x86-64). Cannot use the BPF_STX_MEM() macro here because it hardcodes BPF_MEM mode; construct the instruction directly instead. | ||||
| CVE-2026-5327 | 1 Efforthye | 1 Fast-filesystem-mcp | 2026-04-02 | 6.3 Medium |
| A security flaw has been discovered in efforthye fast-filesystem-mcp up to 3.5.1. The affected element is the function handleGetDiskUsage of the file src/index.ts. Performing a manipulation results in command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-5328 | 1 Shsuishang | 1 Shopsuite Modulithshop | 2026-04-02 | 6.3 Medium |
| A weakness has been identified in shsuishang modulithshop up to 829bac71f507e84684c782b9b062b8bf3b5585d6. The impacted element is the function listItem of the file src/main/java/com/suisung/shopsuite/pt/service/impl/ProductIndexServiceImpl.java of the component ProductItemDao Interface. Executing a manipulation of the argument sidx/sort can lead to sql injection. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. This patch is called 42bcb9463425d1be906c3b290cf29885eb5a2324. A patch should be applied to remediate this issue. | ||||
| CVE-2026-3872 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-04-02 | 7.3 High |
| A flaw was found in Keycloak. This issue allows an attacker, who controls another path on the same web server, to bypass the allowed path in redirect Uniform Resource Identifiers (URIs) that use a wildcard. A successful attack may lead to the theft of an access token, resulting in information disclosure. | ||||
| CVE-2026-4282 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-04-02 | 7.4 High |
| A flaw was found in Keycloak. The SingleUseObjectProvider, a global key-value store, lacks proper type and namespace isolation. This vulnerability allows an unauthenticated attacker to forge authorization codes. Successful exploitation can lead to the creation of admin-capable access tokens, resulting in privilege escalation. | ||||
| CVE-2026-4325 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-04-02 | 5.3 Medium |
| A flaw was found in Keycloak. The SingleUseObjectProvider, a global key-value store, lacks proper type and namespace isolation. This vulnerability allows an attacker to delete arbitrary single-use entries, which can enable the replay of consumed action tokens, such as password reset links. This could lead to unauthorized access or account compromise. | ||||
| CVE-2026-4634 | 1 Redhat | 1 Build Keycloak | 2026-04-02 | 7.5 High |
| A flaw was found in Keycloak. An unauthenticated attacker can exploit this vulnerability by sending a specially crafted POST request with an excessively long scope parameter to the OpenID Connect (OIDC) token endpoint. This leads to high resource consumption and prolonged processing times, ultimately resulting in a Denial of Service (DoS) for the Keycloak server. | ||||
| CVE-2026-4636 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-04-02 | 8.1 High |
| A flaw was found in Keycloak. An authenticated user with the uma_protection role can bypass User-Managed Access (UMA) policy validation. This allows the attacker to include resource identifiers owned by other users in a policy creation request, even if the URL path specifies an attacker-owned resource. Consequently, the attacker gains unauthorized permissions to victim-owned resources, enabling them to obtain a Requesting Party Token (RPT) and access sensitive information or perform unauthorized actions. | ||||
| CVE-2026-5330 | 2 Mayuri K, Sourcecodester | 2 Best Courier Management System, Courier Management System | 2026-04-02 | 6.5 Medium |
| A vulnerability was found in SourceCodester/mayuri_k Best Courier Management System 1.0. Affected by this issue is some unknown functionality of the file /ajax.php?action=delete_user of the component User Delete Handler. Performing a manipulation of the argument ID results in improper access controls. The attack may be initiated remotely. The exploit has been made public and could be used. | ||||
| CVE-2026-34890 | 2 Mark O’donnell, Wordpress | 2 Mstw League Manager, Wordpress | 2026-04-02 | 6.5 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Mark O’Donnell MSTW League Manager allows DOM-Based XSS.This issue affects MSTW League Manager: from n/a through 2.10. | ||||
| CVE-2026-5331 | 1 Opencart | 1 Opencart | 2026-04-02 | 4.7 Medium |
| A vulnerability was determined in OpenCart 4.1.0.3. This affects an unknown part of the file installer.php of the component Extension Installer Page. Executing a manipulation can lead to path traversal. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-5332 | 1 Xiaopi | 1 Panel | 2026-04-02 | 3.5 Low |
| A vulnerability was identified in Xiaopi Panel 1.0.0. This vulnerability affects unknown code of the file /demo.php of the component WAF Firewall. The manipulation of the argument param leads to cross site scripting. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-5333 | 1 Defaultfuction | 1 Content-management-system | 2026-04-02 | 7.3 High |
| A security flaw has been discovered in DefaultFuction Content-Management-System 1.0. This issue affects some unknown processing of the file /admin/tools.php. The manipulation of the argument host results in command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. | ||||
| CVE-2026-28805 | 1 Devcode | 1 Openstamanager | 2026-04-02 | 8.8 High |
| OpenSTAManager is an open source management software for technical assistance and invoicing. Prior to version 2.10.2, multiple AJAX select handlers in OpenSTAManager are vulnerable to Time-Based Blind SQL Injection through the options[stato] GET parameter. The user-supplied value is read from $superselect['stato'] and concatenated directly into SQL WHERE clauses as a bare expression, without any sanitization, parameterization, or allowlist validation. An authenticated attacker can inject arbitrary SQL statements to extract sensitive data from the database, including usernames, password hashes, financial records, and any other information stored in the MySQL database. This issue has been patched in version 2.10.2. | ||||
| CVE-2026-5334 | 1 Itsourcecode | 1 Online Enrollment System | 2026-04-02 | 7.3 High |
| A weakness has been identified in itsourcecode Online Enrollment System 1.0. Impacted is an unknown function of the file /enrollment/index.php?view=edit&id=3 of the component Parameter Handler. This manipulation of the argument deptid causes sql injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. | ||||
| CVE-2026-35168 | 1 Devcode | 1 Openstamanager | 2026-04-02 | 8.8 High |
| OpenSTAManager is an open source management software for technical assistance and invoicing. Prior to version 2.10.2, the Aggiornamenti (Updates) module in OpenSTAManager contains a database conflict resolution feature (op=risolvi-conflitti-database) that accepts a JSON array of SQL statements via POST and executes them directly against the database without any validation, allowlist, or sanitization. An authenticated attacker with access to the Aggiornamenti module can execute arbitrary SQL statements including CREATE, DROP, ALTER, INSERT, UPDATE, DELETE, SELECT INTO OUTFILE, and any other SQL command supported by the MySQL server. Foreign key checks are explicitly disabled before execution (SET FOREIGN_KEY_CHECKS=0), further reducing database integrity protections. This issue has been patched in version 2.10.2. | ||||
| CVE-2026-30867 | 1 Emqx | 1 Cocoamqtt | 2026-04-02 | 5.7 Medium |
| CocoaMQTT is a MQTT 5.0 client library for iOS and macOS written in Swift. Prior to version 2.2.2, a vulnerability exists in the packet parsing logic of CocoaMQTT that allows an attacker (or a compromised/malicious MQTT broker) to remotely crash the host iOS/macOS/tvOS application. If an attacker publishes the 4-byte malformed payload to a shared topic with the RETAIN flag set to true, the MQTT broker will persist the payload. Any time a vulnerable client connects and subscribes to that topic, the broker will automatically push the malformed packet. The app will instantly crash in the background before the user can even interact with it. This effectively "bricks" the mobile application (a persistent DoS) until the retained message is manually wiped from the broker database. This issue has been patched in version 2.2.2. | ||||
| CVE-2026-5338 | 1 Tenda | 2 G103, G103 Firmware | 2026-04-02 | 4.7 Medium |
| A security vulnerability has been detected in Tenda G103 1.0.0.5. The affected element is the function action_set_system_settings of the file system.lua of the component Setting Handler. Such manipulation of the argument lanIp leads to command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. | ||||
| CVE-2026-31931 | 1 Oisf | 1 Suricata | 2026-04-02 | 7.5 High |
| Suricata is a network IDS, IPS and NSM engine. From version 8.0.0 to before version 8.0.4, use of the "tls.alpn" rule keyword can cause Suricata to crash with a NULL dereference. This issue has been patched in version 8.0.4. | ||||
| CVE-2026-26927 | 1 Krajowa Izba Rozliczeniowa | 1 Szafir Sdk Web | 2026-04-02 | N/A |
| Szafir SDK Web is a browser plug-in that can run SzafirHost application which download the necessary files when launched. In Szafir SDK Web it is possible to change the URL (HTTP Origin) of the application call location. An unauthenticated attacker can craft a website that is able to launch SzafirHost application with arbitrary arguments via Szafir SDK Web browser addon. No validation will be performed to check whether the address specified in `document_base_url` parameter is in any way related to the actual address of the calling web application. The URL address specified in `document_base_url` parameter is then shown in the application confirmation prompt. When a victim confirms the execution of the application, it will be called in the context of attacker's website URL and might download additional files and libraries from that website. When victim accepts the application execution for the URL showed in the confirmation prompt with the "remember" option before, the prompt won't be shown and the application will be called in the context of URL provided by the attacker without any interaction. This issue was fixed in version 0.0.17.4. | ||||